History of Locks – People have always felt the urge to protect what they possess. They start by covering the entrance of their caves with stones; later they hid their gold and jewels in the ground.
Then they discovered locks. These were first made of wood and rope. They served the purpose well, although they were not so nicely designed. There is a lot of historical proof which certifies the use of locks long before we could imagine. Even in the Bible (Old Testament, Books of Judges) we have frequent mention of locks and keys.
Lock Types – In our modern society we have keys and locks for everything: our houses, office, car, the even bicycles. We even have more than one key for the same building; keys and locks are so much a part of our daily routine that we don’t even think about them.
But we should give it thought when we have to choose the appropriate lock and key for our needs. Basically we are talking about mechanical locks (based on mechanical activation of the keys) electro-mechanical locks (can be both mechanical or electrical activated, but usually the key is replaced with numbered buttons that have to be pressed) and electrical locks (activated by a card key that has a particular code, programmed to be read by a card reader which is controlled by an automated central or a local processor).
How to pick the lock? – It is not as complicated as we think, but also not as easy as it appears in a lot of movies. Some say that this requires both art and science. We have to have a good knowledge of the lock mechanism and, some practice.
Firstly we insert a tension wrench in the lock (a screwdriver for example) and, with a slight pressure, turn the plug (the lock cylinder) like the proper key would have done (we have to figure out what is the normal direction for the key to be turned). It will help create a small place between the lock pins (placed inside the lock). Then we have to insert a lock pick in order to lift them up (like the proper key will do when inserted in the lock). Doing this and continuing to apply pressure on the tension wrench we will hear a slight click (made by the pins when they fall in the right position) and the lock will be unlocked.
For simple or uncomplicated locks we can use a metal hair pin as a lock pick. But professional locksmiths need an adequate pick tools kit. Basically this contains a tension wrench (they have different shapes and sizes) and several picks(long pieces of metal which are curved up at one end). Some can use an electrical pick gun (contains long pieces of metal and when they vibrate push the pins up and unlock the lock).
Re keying lock – It is quite simple to re-key a lock but it shouldn’t be confused with the process of replacing a lock. Actually it consists of disassembling the lock cylinder and replacing all the old lock pins with new ones, to match the new key. Then the cylinder is reinstalled in the lock!
You would want to re-key a lock when a member of the family loses the house key and we assume that a burglar has it. We should immediately re key the house lock to prevent a potential theft. It doesn’t cost a lot in time and money, but it can spare us a big stress. The same procedure is advisable when moving into a new house/apartment.
Click here to find out more information and history on locks and locksmiths.